A window well keeps soil and water away from a basement window. The well itself is a small cost. Digging, drainage and a cover add up.
What published guides report
- Well by material (Angi): metal $200 to $600, plastic $250 to $800, concrete $750 to $2,500.
- Replacement (HomeServe, citing HomeGuide): $1,000 to $5,000 per window.
- Cover (HomeServe): $250 to $500 on average.
- Permit (HomeAdvisor): $50 to $100, and higher in some areas.
- Finishing an egress opening (Angi): trim, drywall and paint add $300 to $1,200.
A worked example
A plastic well at $250 to $800, a cover at $250 to $500 and a permit at $50 to $100 total $550 to $1,400 before digging and labor. Labor and drainage are the part that varies most.
How we calculated this
We priced the parts separately because installed totals varied between sources. The example is materials and permit only, and we did not add labor because the published figures for it were not consistent enough to blend.
Where prices differ from these ranges
- A new opening cut into a foundation costs far more than replacing a well.
- A drain at the bottom of the well adds cost but protects the window.
- Deeper wells and egress windows need larger, more expensive wells.
Questions to ask a contractor
- Does the well have a drain connected to the foundation drainage?
- Is a cover included, and what type?
- Is the quote for replacing a well or cutting a new opening?
- Who handles the permit and inspection?
Run your numbers
If wet window wells are part of a bigger water problem, use the basement waterproofing calculator to see the whole range.