Composite boards cost more up front than pressure treated wood. The question is how much more once labor is added, and published guides split material and labor to show it.
What published guides report
- Installed deck, overall (Angi, quoted by NerdWallet): $30 to $60 per square foot.
- Material only (NerdWallet): pressure treated wood $3 to $8, composite $5 to $20, vinyl or PVC $5 to $13 and metal $6 to $20 per square foot.
- Labor (Angi): $15 to $35 per square foot.
- Average total: NerdWallet cites $14,000 and Angi cites $8,246.
- Railing: the calculator uses $25 to $30 per linear foot.
A worked example
For a 300 square foot deck, pressure treated wood at $18 to $43 per square foot (material plus labor) comes to $5,400 to $12,900. Composite at $20 to $55 comes to $6,000 to $16,500. Forty feet of railing at $25 to $30 adds $1,000 to $1,200. For comparison, Angi's overall $30 to $60 range gives $9,000 to $18,000 for 300 square feet.
How we calculated this
We added NerdWallet's material prices to Angi's labor range, low to low and high to high, then multiplied by the deck area. This is our own method, not a figure any one source states, and the two sources disagree on averages, so treat the result as a planning range.
Where prices differ from these ranges
- Deck height, stairs and shape raise labor and material use.
- The composite range is wide, from $5 to $20 per square foot for material alone.
- A permit is often required and is not included in these prices.
- Old deck removal and site prep are usually extra.
Questions to ask a contractor
- Is the price for materials only or installed?
- Which board brand and warranty does this quote use?
- Does the quote include footings, stairs and railing?
- Who pulls the permit and schedules the inspection?
Run your numbers
Use the deck cost calculator to enter your deck area, pick a material and add railing to see a range for your size.