CostToReno

Home / Guides

Guide ยท reviewed November 2026

Gutter installation cost per linear foot by material

Gutters are priced by the foot, and the material sets most of the price. The reason to care here is that gutters feed your drainage: water that leaves the downspout needs somewhere to go.

What published guides report

  • Overall (This Old House): $3 to $29 per linear foot, about $16 on average, and $600 to $5,800 for a 2,000 square foot home.
  • Vinyl and aluminum (This Old House): $3 to $8 per linear foot, the lowest cost materials.
  • Seamless, installed (Fixr): vinyl $6 to $11, aluminum $14 to $20, copper $29 to $40 per linear foot.
  • National figures (Fixr): average $1,409, with a range of $510 to $6,917.

A worked example

For 150 linear feet, This Old House's $3 to $8 gives $450 to $1,200. Fixr's installed seamless aluminum at $14 to $20 gives $2,100 to $3,000. The gap is mostly whether labor and seamless forming are counted, so always ask what the per foot price includes.

How we calculated this

Some guides price materials only and some price installed gutters. We showed both so the gap is visible and picked no single number. We left out the single guide that gave a much higher average without a clear basis.

Where prices differ from these ranges

  • Seamless gutters cost more than sectional ones.
  • A second story adds labor.
  • Downspouts, guards and heat tape are priced separately.

Questions to ask a contractor

  • Is the per foot price materials only or installed?
  • Are downspouts and extensions included?
  • Are they seamless, and formed on site?
  • Where does the downspout discharge, and how far from the house?

Run your numbers

If water from the downspouts pools near the foundation, use the French drain calculator to see what a drain would add.

Sources